SCHEDULED MAINTENANCE KITS
The Air-Cooled Scheduled Maintenance kits offer all the hardware necessary to perform a complete maintenance on our air cooled generators. Oil must be purchased separately based upon manufacturer recommendations listed below. Maintenance is recommended at every 200 hours or 2 years.
- Air Filter
- Oil Filter
- Spark Plugs
- Spark Plug Wrench*
- Oil Funnel
- Reminder Sticker
*May not be included in all kits
Scheduled Maintenance Kit Spec Sheet: Residential Generators
Scheduled Maintenance Kit Spec Sheet: Commercial Generators
NEXUS™ REMOTE WIRELESS MONITOR
No need to go outside during inclement weather to check the generator status. Generac's wireless remote gives you instant status updates without ever leaving the house. Available to use on generators up to 60 kW.
- Sleek appearance with flush LED indicator for smooth contour
- Virtually full control panel simulated control pad
- A/C powered with battery back-up
- Includes cradle for desk or wall mounting
Remote Wireless Monitor Spec Sheet
COLD WEATHER ACCESSORIES
The Cold Weather Kit, applicable for all standby generators includes a battery warmer with a built-in thermostat. When temperatures fall below an acceptable level, the thermostat activates the battery warmer maintaining optimum battery temperature for the best generator start up.
In addition to the battery warmer kits, a crankcase warmer is available. It is specifically designed to maintain optimum oil temperature for maximum starting capability in cold weather. These kits are recommended for generators installed in regions where the temperature regularly falls below 10 degrees.
Cold Weather Kit Spec Sheet
The Extreme Cold Weather Kit, for liquid-cooled generators only, includes the appropriate block heater, step-by-step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection.
Extreme Cold Weather Kit Spec Sheet
Fascia base wrap snaps together to fit around the base edge of the air-cooled automatic standby generators to provide a sleek, contoured appearance. The fascia trim offers protection from rodents and insects by covering the lifting holes located in the base.
Fascia/Base Trim Spec Sheet
Every standby generator requires a battery to start the system. Generac offers the recommended 26R, wet cell battery for use with all air-cooled standby product and liquid-cooled standby product 45 kW and below, excluding the QT4842.
26R Battery Spec Sheet